- Terminal Devices
- Access Control
- Solutions
- Services and functionalities
- News
- Support
- Shop
-
English
LabKey Mini
LabKey Glass
LabKey Next
LabKey Extreme
Wi-Fi & bluetooth connection
Wi-Fi / LAN Connection
Wi-Fi / LTE Connection
Local Network Connection
KIT LABKEY ACCESS PRO 8
-
![]()
LTE control unit
-
![]()
PRO control unit
-
![]()
Basic control unit
- Identify the most suitable place to place the reader and control unit.
- Connect the reader and control unit together as indicated, based on the control device chosen.
No shielding is needed. In the case of multiple readers for a single control unit, it is possible to connect them in star or bridge. - Connect the electronic devices you want to operate to the control unit’s relays.
- Connect the power cable (supplied) to the control unit.
Wi-Fi configuration
- Access the LABKEY-…. WiFi network. via your PC or smartphone, entering the password you find in the instruction booklet.
- Open any web browser and type http://128.50.1.1 in the address bar.
- Click on “Start Wi-Fi configuration” and connect the control unit to your building’s network.
Connection to LTE SIM
-
Insert the SIM into the USB stick (both supplied).
-
If necessary, use the supplied USB extension cable to direct the stick to a point where the connection is more stable.
-
Wait 5 minutes for the control unit to go online and you are ready to use it.
Connection to Ethernet cable
LabKey supports the 4earth project